Deploy Network in A New House

Network has changed our lifestyle and it has become an important part of our daily life. Therefore, home network deployment is a very common project. When it comes to the components required for the network deployment, many people would say Ethernet cable and router, without hesitation. However, when you start the project, you will find it is not that simple. To deploy network in a new house, future-proof cabling and cost-effective components are two essential elements. And this article will share some tips with you based on these two elements.

home network deployment

Run Conduit

We know that conduit can protect cable from damage, in addition, it will allow you to pull new wiring in the future. No matter what wires you require in the future, you can easily replace them. Remember to run more conduit than you think you need. Run conduit to every room. Typically, run it to whichever wall you’re thinking of placing your equipment. Also, run it to locations in hallways and on floors where you may place future routers/access points for wireless networking. You will find that Power over Ethernet is useful for this.

Cat6 Cable Is Fine

For Ethernet cable, Cat6 cable is fine for all current standards unless you have a giant mansion. Cat6 cable is a standardized twisted pair cable for Ethernet and it is backward compatible with the Cat3, Cat5 and Cat5e cable standards. In addition, Cat6 cable provides performance of up to 250 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T/1000BASE-TX (Gigabit Ethernet), and 10GBASE-T (10-Gigabit Ethernet). For transmission distance, Cat6 cable can reach 100 meters for slower network speeds (up to 1,000 Mbps) and higher network speeds over short transmission distance—it can achieve only 55 meters at the speed of 10 Gbps and 33 meters in high crosstalk conditions. You only need Cat6a cable if you plan to run cable at 10 Gbps and longer than 55 meters (180 ft). Also, remember to have “extra” cables which will save you enormous hassle and expense.

Dual Band Router Will Be Better

We know that wireless network utilizes either 2.4 GHz frequency band or 5 GHz frequency band. The 2.4 GHz wireless network covers a larger range than 5 GHz wireless network, but 5 GHz band can provides faster speed. In wireless home network, many older Wi-Fi devices do not support 5 GHz band. It is not difficult to find that 2.4 GHz and 5 GHz have their own advantages. As a result, dual band router will be better for your home network deployment.

Utilize PoE

If you want to set up multiple access points and IP cameras, PoE technology is a good option which can realize the power and data transmission over the same Ethernet cable at the same time. PoE devices utilize the original PoE standard, IEEE 802.3af, which provides up to 15.4W of DC power to each device. In addition to wireless access point and IP camera, there are some other PoE devices on the market, such as IP phone and PoE switch.

PoE technology

Conclusion

In fact, once you have decided to deploy network in your new house, there will be a lot of things that you have to think about, such as which type conduit to run, how long cable to buy, where to place the router, how many access points to set up, which kind PoE switch to buy, and so on. But there is another important thing that you must pay attention to, that’s where to buy what you need. FS.COM can provide high quality products at low price, such as 305 meters (1000 ft) is US$ 120.00, 8 port PoE switch is US$ 159.00.

Originally published at: http://www.fiber-optical-networking.com/deploy-network-in-a-new-house.html

Advertisements

Things You Need to Know About Home Network

Network has become an indispensable part of our daily life. If you have a computer at home, I’m sure that you are not unfamiliar with home network. In the past, there was only one way for home network deployment—wired network. However, the pace of network technology development has never slowed down, and now, there is wireless network, which makes it more convenient to get access to the network. As we are in wired network or wireless network environment every day, it is necessary for us to know something about network, especially home network. This article will introduce some basic knowledge about wired network and wireless network.

home network
Wired Network

In wired network, there are two important devices, one is router and the other one is network cable.

Router

We know that router is designed with several physical ports on the front or back of the unit, such as one WAN (wide area network) port, four LAN (local area network) ports and one power input port. Also, there are some LED lights to display device status. All WAN port and LAN ports are RJ45 interface, so one end of network cable can be plugged into them. But for the other end of network cable, there is one difference between WAN port and LAN port. For WAN port, the other end of network cable is plugged into an Internet source, such as broadband service provider; while for LAN port, the other end of network cable is plugged into the RJ45 port on Ethernet-ready device, like computer. The moment you plug a device into a router, you have yourself a wired network.

Network Cable

As for the selection of network cable used for the connection, either cat5e cable or cat6 cable will be OK. The latest network cabling standard currently in use is cat6 cable, which is designed to be faster and more reliable than cat5e cable. Both of them support data speed at 10Mb/s, 100Mb/s and 1000Mb/s, while cat6 cable is able to achieve 10Gb/s. Also, cat5e cable and cat6 cable can be used interchangeably, For most home usage, what cat5 cable has to offer is more than enough. But if you think about future-proof, cat6 cable is a great option in addition to its high price.

Wireless Network

For wireless network, devices don’t use network cable to connect to the router. Instead, they use radio wireless connections called Wi-Fi (Wireless Fidelity). This is one big difference between wireless network and wired network. The devices used in wireless network don’t need to have ports, just antennas, which are sometimes hidden inside the device itself. In order to build Wi-Fi environment, an access point (AP) is required.

Access Point

An access point is a central device that broadcasts a Wi-Fi signal for Wi-Fi clients to connect to. Generally, each wireless network belongs to one access point. For example, when you hang around some stores, you can see different networks popping up on your phone’s screen and each of them belongs to one access point. For home wireless network deployment, you can buy an access point separately and connect it to a router. Now on the market, a kind of wireless router is available, which is a regular router with a built-in access point. This makes your wireless network building more convenient.

Conclusion

In a typical home network, there are generally both wired and wireless devices, and they can all talk to one another. To build a stable home network, it is important to choose quality router, network cable and access point. Though FS.COM does not provide router, they have high quality network cable and wireless access point.