Applications of FHX Ultra MTP/MPO Cassettes

Nowadays, data communication technology has developed rapidly. To achieve high speed transmission, it is very common to see complex cabling system in data center, which may even include thousands of fibers. Under such circumstances, saving space in data center is a critical issue. Therefore, fiber optic components or cabling solutions which are characterized by high density will gain the popularity among data center managers. MTP component is such one that can satisfy the requirement. And this article is going to introduce FHX ultra MTP/MPO cassettes and their applications in data center.

Overview of FHX Ultra MTP/MPO Cassettes

MTP/MPO cassette is widely used for high-density cabling in data centers. It is pre-terminated and pre-tested enclosed unit which can provide secure transition between MTP and LC, SC or MTP discrete connectors. And it is usually structured with LC, SC or MTP adapters on the front side of the cassette and MTP adapters at the rear of the cassette. FHX Ultra MTP/MPO cassette has three types: FHX ultra 8F MTP-LC cassette, FHX 12F MTP-LC cassette and FHX MTP conversion module. Here is a figure for you to have a better understanding of these three types of MTP cassettes.

FHX Ultra MTP MPO Cassettes
Applications of FHX Ultra MTP/MPO Cassettes

For application, MTP cassette can be easily found in 10G, 40G and 100G network applications in data center.

FHX Ultra 8F MTP-LC Cassette

Since both FHX ultra 8F MTP-LC cassette and FHX 12F MTP-LC cassette serve to realize the transition from small diameter ribbon cables terminated with MTP connector(s) to the more common LC interfaces used on the transceiver terminal equipment, this part will take FHX ultra 8F MTP-LC cassette as an example. The FHX ultra 8F MTP-LC cassette is structured with four LC duplex (8-fiber) adapters on the front side of the cassette and one 12-fiber MTP adapter at the rear of the cassette, and it is often used for 10G to 40G connection. As the following figure shows, we can also add FHX ultra enclosure and FHX MTP adapter panel to the cabling solution. From the left to the right, four 10G SFP+ transceivers are plugged into four 10G ports on the 10G switch. Then they are connected to LC adapters on the FHX ultra 8F MTP-LC cassette through four LC duplex patch cables. The cassette is installed in the FHX ultra enclosure. One MTP trunk cable connects two MTP adapters respectively on the rear of the cassette and MTP adapter panel. Finally, the 40G QSFP+ transceiver on the 40G switch is connected with MTP adapter on MTP adapter panel through another MTP trunk cable. In this application, 100% fiber utilization is realized. What’s more, the 1U fiber enclosure can house 18 x 8F FHX cassettes or 12 x 12F FHX cassettes, with the total fiber capacity up to 144 fibers for LC interface, greatly saving cabling density.

application of FHX ultra 8F MTP-LC cassette
FHX MTP Conversion Module

The FHX MTP conversion module has several kinds, this part will take 3x MTP-8 to 2x MTP-12 (24-fiber) conversion module as an example. This kind of FHX MTP conversion module is structured with three 8-fiber MTP adapters on the front side of the module and two 12-fiber MTP adapters at the rear of the module. We can use FHX ultra enclosure to hold MTP conversion module. The following figure shows the cabling solution for 120G to 120G connection. Three 40G QSFP+ transceivers are respectively plugged into 40G ports on three 40G switches on both sides. Then the three 40G QSFP+ transceivers are connected with three 8-fiber MTP adapters on the front side of the module through three MTP trunk cables. Finally, two 12-fiber MTP adapters at the rear of two respectively modules are connected through two MTP trunk cables. This cabling solution utilize Based-8 MTP cabling system and achieves 100% fiber utilization. With the use of 1U FHX ultra enclosure, twelve 3x MTP-8 to 2x MTP-12 conversion module can be used in this cabling solution, which creates a 33% spacing-saving upgrading path.

application of FHX MTP conversion module
Conclusion

The FHX ultra MTP/MPO cassettes can not only meet the need for saving space in data center cabling, but also realize 100% fiber utilization during the cabling. With superior best-in-class features, FS.COM FHX ultra MTP/MPO cassettes can offer you cost-effective, simple 10G to 40G, 40G to 40G, 40G to 100G or 120G to 120G cabling solutions and ensures high performance at the same time. For more details, please visit our site.

Things You Must Know About MTP Cassette

With increasing demand for faster data transmission speed, 40G and 100G network have been widely applied to data centers. When it comes to cabling system, data center managers usually prefer fiber optic components which can provide high bandwidth, high port density, easy management, future data rates migration and security monitoring. Modular system is ideal option which can realize simple high-density installation and tidy cable management. MTP cassette, as the key component of the modular system, is widely used for high-density cabling in data centers. This article will talk about things you must know about MTP cassette.

Overview of MTP Cassette

MTP fiber optic cassette is pre-terminated and pre-tested enclosed unit. It is usually fitted with 12 fibers or 24 fibers. Structured with LC or SC adapters on the front side of the cassette and MTP adapters at the rear of the cassette, MTP fiber optic cassette provides secure transition between MTP and LC or SC discrete connectors. Therefore, it is commonly used to interconnect MTP backbones with LC or SC patching. Supporting various network cabling standards, the cassette is easy to mix, match, add and replace as the connectivity needs grow or change. Here is a figure of 12-fiber and 24-fiber MTP-LC cassette for you.

12-fiber and 24-fiber MTP-LC cassette

Working Principle of MTP Cassette

MTP cassette serves to realize the transition from small diameter ribbon cables terminated with MPO MTP connector(s) to the more common LC or SC interfaces used on the transceiver terminal equipment. Typically, the fan-outs incorporate LC or SC connectors plug into LC or SC adapters on the front side of the cassette and MTP MPO fiber connector(s) plug into MTP adapter(s) mounted at the rear of the cassette. One or more MTP fan-out assemblies can be installed inside the cassette to connect up to two 12-fiber ribbon cables for a total of 24 fibers. Alignment pins are pre-installed in the MTP connector located inside the cassette. These pins precisely align the mating fibers in the MTP connectors at either end of the array cables that plug into the cassettes.

For application, MTP cassette can be easily found in 10G, 40G and 100G network applications in data center. For 10G connectivity, MTP cassette is used to connect 10G device to 10G device, especially when the distance between two devices is too long. And for 40G connectivity, MTP cassette is used to connect 40G device to 40G device. Besides, it can provide the smooth path for 10G to 40G migration and 40G to 100G migration. What’s more, it is important to buy MTP cassette from MTP cassette modules manufacturers, or you may get terrible network performance.

Advantages of MTP Cassette

MTP cassette has many advantages.

Advantage 1. It allows for rapid deployment of high density data center infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes.

Advantage 2. It is designed to reduce installation time and cost for an optical network infrastructure in the premises environment.

Advantage 3. As MTP component, it features superior optical and mechanical properties.

Advantage 4. It can provide optimized performance for low insertion losses and power penalties in tight power budget, high-speed network environments.

Advantage 5. It has internal fiber management which keeps the fibers from bending too tightly.

Advantage 6. It has the array connection located in a recess in the cassette housing which provides better protection.

Advantage 7. A 12-fiber or 24-fiber cassette can be mounted in 1U scaling up to 72 or in 3U scaling up to 336 discrete LC connectors which is convenient for high-density cabling.

Conclusion

Characterized with fast installation, high density and high performance cabling for data centers, MTP components gain great polarity among the world. MTP cassette, able to deliver high optical performance, rapid and error-free installation and reliable robust operation, is a great choice for high-density cabling system. And I hope after reading this article, you can have a better understanding of MTP cassette.