A Closer Look at HP ProCurve 2910al-24G Switch (J9145A)

Today, big data centers are upgraded from 10G to 40G or 100G, and some small homelabs migrate from 1G to 10G. For some small business data center, 24 port switch is enough. The switches produced by HP are popular with many data center designers for the high quality and low price. The HP ProCurve 2910al-24G Switch (J9145A) is highly recommended in many forums. This article will guide you to have a closer look at HP ProCurve 2910al-24G Switch (J9145A) switch.

Overview

The HP ProCurve 2910al-24G switch (J9145A) is a 24 port switch that can be used to build high-performance switched network. It offers low latency for high-speed networking. For port configuration, it has twenty 10/100/1000 ports, four dual-personality ports, one RJ45 serial console port and four 10G ports. The HP ProCurve 2910al-24G switch can provide the most flexible and easy-to-deploy uplinks in its class. It can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.

HP ProCurve 2910al-24G Switch (J9145A)

Applications of HP ProCurve 2910al-24G Switch

This part will give a detailed introduction to the network ports on HP ProCurve 2910al-24G switch and cabling solutions for the switch.

Ports on HP ProCurve 2910al-24G Switch
  • Twenty 10/100/1000 ports: All these ports have the “Auto MDIX” feature, which means you can use either straight-through or crossover twisted-pair cables to connect any network devices to the switch.
  • Four dual-personality ports: Each port can be used as either an RJ45 10/100/1000 port or as a mini-GBIC slot for use with mini-GBIC transceivers. By default, the RJ45 connectors are enabled. If a mini-GBIC is installed in a slot, it is enabled and the associated RJ45 connector is disabled and cannot be used. If the mini-GBIC is removed, the associated RJ45 port is automatically re-enabled.
  • Four 10G ports: These ports provide connectivity for 10G speed though either copper or fiber optic media.
Cabling Solution

Since HP ProCurve 2910al-24G switch has 10/100/1000 ports, it can be used for 1G to 1G connection. As shown in the following figure, two 1000BASE-SX SFP transceiver modules are respectively plugged into 1G ports on two HP ProCurve 2910al-24G switches. Then these two 1000BASE-SX SFP transceiver modules are connected via a LC multimode fiber optic cable.

HP ProCurve 2910al-24G Switch (J9145A) for 1G connection

Designed with 10G ports, HP ProCurve 2910al-24G switch can realize 10G to 10G connection just like the above 1G connection. Just replace the 1000BASE-SX SFP transceiver module with 10GBASE-SR SFP+ transceiver. Besides, you can also accomplish 10G to 10 connection by using a 10G SFP+ to SFP+ DAC twinax cable. The following figure shows the cabling solution for you.

HP ProCurve 2910al-24G Switch (J9145A) for 10G connection

Conclusion

The HP ProCurve 2910al-24G switch (J9145A) is a high-performance Gigabit Ethernet switch. It is a good selection for small business network deployment. If you need compatible fiber optic transceiver and fiber optic cable for HP ProCurve 2910al-24G switch, you can have a look at FS.COM. The following table shows some compatible optical components.

FS Compatible Optical Components

Originally published at: http://www.fiber-optical-networking.com/a-closer-look-at-hp-procurve-2910al-24g-switch-j9145a.html

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s